Cures rapidly to withstand 10,000 PSIPrevents galling and protects mated threaded areas from rust and corrosionPrevents oil, air and fluid leaksReliably seals metal, tapered pipe thread fittingsTemperature range from -65°F to 300°F (-54°C to 149°C)

Contains no fillers or particles which could contaminate system fluids, foul valves or clog fine filters and screensDesigned for locking and sealing high pressure hydraulic and pneumatic systems

Non-corrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfacesIdeal for on-the-spot and emergency repairs, or when a conventional gasket is unavailableFills gaps up to 0.015 inchCures to a...

Designed to eliminate movement on rigid assembliesHigh chemical resistanceSeals and bonds flangesWill not take a compression set

Heavy-bodied, elastomeric rubber provides instant sealSuperior flexibility and adhesion accommodates joint movementInstant low pressure seal

Superior to conventional lock washers, nylon inserts and other mechanical devices as Permatex Threadlockers secure the entire fastener assembly against loosening from shock or vibration and they maintain fastener clamp forcesThey also seal the threads...

Superior to conventional lock washers, nylon inserts and other mechanical devices as Permatex Threadlockers secure the entire fastener assembly against loosening from shock or vibration and they maintain fastener clamp forcesThey also seal the threads...

High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10 mm to 25 mm)Especially well-suited for permanently locking studs and press fitsAdds 3,000 psi holding power on slip and press fit assembliesLocks against vibration looseningMay...

High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10 mm to 25 mm)Especially well-suited for permanently locking studs and press fitsAdds 3,000 psi holding power on slip and press fit assembliesLocks against vibration looseningMay...

High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10 mm to 25 mm)Especially well-suited for permanently locking studs and press fitsAdds 3,000 psi holding power on slip and press fit assembliesLocks against vibration looseningMay...

High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10 mm to 25 mm)Especially well-suited for permanently locking studs and press fitsAdds 3,000 psi holding power on slip and press fit assembliesLocks against vibration looseningMay...

Superior to conventional lock washers, nylon inserts and other mechanical devices as Permatex Threadlockers secure the entire fastener assembly against loosening from shock or vibration and they maintain fastener clamp forcesThey also seal the threads...