7.5HP, 1770//1470RPM, 3PH, 60HZ, 213T, XPFC, F

Catalog Number: CPX21746T|Enclosure: XPFC|Frame: 213T|Frame Material: Iron|Frequency: 50.00 Hz 60.00 Hz|Output @ Frequency: 5.000 HP @ 50 HZ 7.500 HP @ 60 HZ|Phase: 3|Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ|Voltage @ Frequency: 230.0 V @ 60 HZ 380.0 V @ 50 HZ 460.0 V @ 60 HZ 190.0 V @ 50 HZ|XP Class and Group: CLI GP C,D; CLII GP E,F,G|XP Division: Division I|Agency Approvals: UR CSA EEV CSA|Ambient Temperature: 40 �C|Auxillary Box: No Auxillary Box|Auxillary Box Lead Termination: None|Base Indicator: Rigid|Bearing Grease Type: Polyrex EM (-20F +300F)|Blower: None|Constant Torque Speed Range: 6|Current @ Voltage: 8.700 A @ 380.0 V 20.200 A @ 230.0 V 17.400 A @ 190.0 V 10.100 A @ 460.0 V|Design Code: A|Drip Cover: No Drip Cover|Duty Rating: CONT|Efficiency @ 100% Load: 91.7 %|Electrically Isolated Bearing: Not Electrically Isolated|Enclosure Modification: Severe Duty Features|Feedback Device: NO FEEDBACK|High Voltage Full Load Amps: 8.7 a|Heater Indicator: No Heater|Insulation Class: F|Inverter Code: Inverter Duty|IP Rating: IP55|KVA Code: K|Lifting Lugs: Standard Lifting Lugs|Locked Bearing Indicator: Locked Bearing|Max Speed: 2700 rpm|Motor Lead Termination: Flying Leads|Motor Type: 0738M|Mounting Arrangement: F1|Number of Poles: 4|Overall Length: 20.02 IN|Power Factor: 75|Product Family: General Purpose|Pulley Face Code: Standard|Rodent Screen: None|RoHS Status: ROHS NON-COMPLIANT|Service Factor: 1.00|Shaft Diameter: 1.375 IN|Shaft Ground Indicator: No Shaft Grounding|Shaft Rotation: Reversible|Speed: 1770 rpm|Speed Code: Single Speed|Motor Standards: NEMA|Starting Method: Direct on line|Thermal Device - Bearing: None|Thermal Device - Winding: Normally Closed Thermostat|Vibration Sensor Indicator: No Vibration Sensor|Winding Thermal 1: None|Winding Thermal 2: None|XP Temp Code: T3C|Full Load Torque: 0 LB-FT|No-Load Current: 0 A|Line-Line Res. @ 25� C: 1.22 Ohms A Ph / 0 Ohms B Ph|Temp. Rise @ Rated Load: 42� C|Temp. Rise @ S.F. Load: |Start Configuration: DOL|Break-Down Torque: 81.48 LB-FT|Pull-Up Torque: 38.25 LB-FT|Locked-Rotor Torque: 50.29 LB-FT|Starting Current: 82.02 A