Baldor-Reliance CEM7075T 3HP, 3450RPM, 3PH, 60HZ, 145TC, 3532M, XPFC, F1

Catalog Number: CEM7075T|Enclosure: XPFC|Frame: 145TC|Frame Material: Steel|Frequency: 60.00 Hz|Output @ Frequency: 3.000 HP @ 60 HZ|Phase: 3|Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ|Voltage @ Frequency: 460.0 V @ 60 HZ 230.0 V @ 60 HZ|XP Class and Group: CLI GP D|XP Division: Division I|Agency Approvals: CSA CSA EEV UR|Ambient Temperature: 40 �C|Auxillary Box: No Auxillary Box|Auxillary Box Lead Termination: None|Base Indicator: Rigid|Bearing Grease Type: Polyrex EM (-20F +300F)|Blower: None|Current @ Voltage: 3.600 A @ 460.0 V 7.200 A @ 230.0 V 7.900 A @ 208.0 V|Design Code: B|Drip Cover: No Drip Cover|Duty Rating: CONT|Efficiency @ 100% Load: 86.5 %|Electrically Isolated Bearing: Not Electrically Isolated|Feedback Device: NO FEEDBACK|High Voltage Full Load Amps: 3.6 a|Front Face Code: Standard|Front Shaft Indicator: None|Heater Indicator: No Heater|Insulation Class: B|Inverter Code: Not Inverter|KVA Code: L|Lifting Lugs: No Lifting Lugs|Locked Bearing Indicator: Locked Bearing|Motor Lead Exit: Ko Box|Motor Lead Termination: Flying Leads|Motor Lead Quantity/Wire Size: 9 @ 18 AWG|Motor Type: X3532M|Mounting Arrangement: F1|Number of Poles: 2|Overall Length: 16.10 IN|Power Factor: 92|Product Family: Hazardous Location Motor|Pulley End Bearing Type: Ball|Pulley Face Code: C-Face|Pulley Shaft Indicator: Standard|Rodent Screen: None|RoHS Status: ROHS NON-COMPLIANT|Service Factor: 1.00|Shaft Diameter: 0.875 IN|Shaft Extension Location: Pulley End|Shaft Ground Indicator: No Shaft Grounding|Shaft Rotation: Reversible|Shaft Slinger Indicator: No Slinger|Speed: 3450 rpm|Speed Code: Single Speed|Motor Standards: NEMA|Starting Method: Direct on line|Thermal Device - Bearing: None|Thermal Device - Winding: Normally Closed Thermostat|Vibration Sensor Indicator: No Vibration Sensor|Winding Thermal 1: None|Winding Thermal 2: None|XP Temp Code: T3C|Full Load Torque: 0 LB-FT|No-Load Current: 0 A|Line-Line Res. @ 25� C: 4.72 Ohms A Ph / 0 Ohms B Ph|Temp. Rise @ Rated Load: 61� C|Temp. Rise @ S.F. Load: 73� C|Start Configuration: DOL|Break-Down Torque: 18 LB-FT|Pull-Up Torque: 11 LB-FT|Locked-Rotor Torque: 16 LB-FT|Starting Current: 33 A