Baldor-Reliance JL3515A 2HP, 3450RPM, 1PH, 60HZ, 56J, 3535L, TEFC, F1

Catalog Number: JL3515A|Enclosure: TEFC|Frame: 56J|Frame Material: Steel|Frequency: 60.00 Hz|Output @ Frequency: 2.000 HP @ 60 HZ|Phase: 1|Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ|Voltage @ Frequency: 230.0 V @ 60 HZ 115.0 V @ 60 HZ|XP Class and Group: None|XP Division: Not Applicable|Agency Approvals: CSA UR|Ambient Temperature: 40 �C|Auxillary Box: No Auxillary Box|Auxillary Box Lead Termination: None|Base Indicator: No Mounting|Bearing Grease Type: Polyrex EM (-20F +300F)|Blower: None|Current @ Voltage: 11.500 A @ 230.0 V 12.100 A @ 208.0 V 23.000 A @ 115.0 V|Design Code: L|Drip Cover: No Drip Cover|Duty Rating: CONT|Efficiency @ 100% Load: 74.0 %|Electrically Isolated Bearing: Not Electrically Isolated|Feedback Device: NO FEEDBACK|High Voltage Full Load Amps: 11.5 a|Front Face Code: Standard|Front Shaft Indicator: None|Heater Indicator: No Heater|Insulation Class: B|Inverter Code: Not Inverter|KVA Code: K|Lifting Lugs: No Lifting Lugs|Locked Bearing Indicator: Locked Bearing|Motor Lead Exit: Ko Box|Motor Lead Termination: Flying Leads|Motor Lead Quantity/Wire Size: 4 @ 14 AWG, A&J|Motor Type: 3535L|Mounting Arrangement: F1|Number of Poles: 2|Overall Length: 14.62 IN|Power Factor: 82|Product Family: General Purpose|Pulley End Bearing Type: Ball|Pulley Face Code: C-Face|Pulley Shaft Indicator: Ext Thread|Rodent Screen: None|RoHS Status: ROHS COMPLIANT|Service Factor: 1.00|Shaft Diameter: 0.625 IN|Shaft Extension Location: Pulley End|Shaft Ground Indicator: No Shaft Grounding|Shaft Rotation: Fixed Opposite Standard|Shaft Slinger Indicator: No Slinger|Speed: 3450 rpm|Speed Code: Single Speed|Motor Standards: NEMA|Starting Method: Direct on line|Thermal Device - Bearing: None|Thermal Device - Winding: Do Not Use Eve-Not Valiid|Vibration Sensor Indicator: No Vibration Sensor|Winding Thermal 1: Automatic Thermal Overload|Winding Thermal 1 Location: SB|Winding Thermal 2: None