Baldor-Reliance VLECP82394T-4 15HP, 3520RPM, 3PH, 60HZ, 254LP, TEFC, V1

Catalog Number: VLECP82394T-4|Enclosure: TEFC|Frame: 254LP|Frame Material: Iron|Frequency: 60.00 Hz|Output @ Frequency: 15.000 HP @ 60 HZ|Phase: 3|Synchronous Speed @ Frequency: 3600 RPM @ 60 HZ|Voltage @ Frequency: 460.0 V @ 60 HZ|XP Class and Group: CLI GP A,B,C,D|XP Division: Division II|Agency Approvals: CCSA US CSA EEV UR|Ambient Temperature: 40 �C|Auxillary Box: No Auxillary Box|Auxillary Box Lead Termination: None|Base Indicator: No Mounting|Bearing Grease Type: Polyrex EM (-20F +300F)|Blower: None|Constant Torque Speed Range: 6|Current @ Voltage: 17.000 A @ 460.0 V|Design Code: B|Drip Cover: Drip Cover|Duty Rating: CONT|Efficiency @ 100% Load: 91.0 %|Electrically Isolated Bearing: Not Electrically Isolated|Enclosure Modification: 841|Feedback Device: NO FEEDBACK|High Voltage Full Load Amps: 17.0 a|Heater Indicator: No Heater|Insulation Class: F|Inverter Code: Inverter Duty|IP Rating: IP56|KVA Code: G|Lifting Lugs: Vertical Lifting Lugs|Locked Bearing Indicator: Locked Bearing|Max Speed: 5400 rpm|Motor Lead Termination: Ring Terminals|Motor Type: 0934M|Mounting Arrangement: V1|Number of Poles: 2|Overall Length: 29.53 IN|Power Factor: 89|Product Family: Chem Process S/P 32-8 IEEE 841|Pulley Face Code: P-Base|Rodent Screen: None|Service Factor: 1.15|Shaft Diameter: 1.625 IN|Shaft Ground Indicator: No Shaft Grounding|Shaft Rotation: Reversible|Speed: 3520 rpm|Speed Code: Single Speed|Motor Standards: NEMA|Starting Method: Direct on line|Thermal Device - Bearing: None|Thermal Device - Winding: None|Vibration Sensor Indicator: No Vibration Sensor|Winding Thermal 1: None|Winding Thermal 2: None|XP Temp Code: T3C|Full Load Torque: 0 LB-FT|No-Load Current: 0 A|Line-Line Res. @ 25� C: 0.622 Ohms A Ph / 0 Ohms B Ph|Temp. Rise @ Rated Load: 54� C|Temp. Rise @ S.F. Load: 67� C|Start Configuration: DOL|Break-Down Torque: 87.8 LB-FT|Pull-Up Torque: 26 LB-FT|Locked-Rotor Torque: 32.7 LB-FT|Starting Current: 114 A