- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
.115- .187" 166 SERIES P (4 EA / BX)
681-50612$233.70Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Insulating PVC handle which is octagon shaped, preventing them from rolling when laid down Hole extends... -
161A 1-1/4"-CAP. TOOLMAK (1 EA)
681-50594$128.21For holding work together in tapping and drilling and on various machine setups Ends of the jaws are rounded to permit clamping under shoulders or in recesses A retaining ring holds the loose jaw in... -
162B PIN VISE .030-.062" (6 EA / CTN)
681-50600$163.05Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Handles and binding nuts are nickel-plated Hole extends through the full length of the handles so that... -
165 DOUBLE END PIN VISE-0-.125" RANGE (6 EA / BX)
681-50608$133.02Reversible collets with two size capacities at each end Both ends of each chuck are beveled, providing "back support" Knurled handle and binding nut One chuck holds 0" to 0.031" and 0.093" to 0.125"... -
166A 0-.040" RANGE PIN V (6 EA / BOX)
681-50609$251.58Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Handles and binding nuts are nickel-plated Hole extends through the full length of the handles so that... -
166C .050-.125"RANGE PIN (1 EA)
681-50611$50.19Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Insulating PVC handle which is octagon shaped, preventing them from rolling when laid down Hole extends... -
240A PIN VISES W/ TAPERE (1 EA)
681-51136$49.44Special collet design with tapers at both ends, providing maximum clamping surface Have a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb... -
240B PIN VISE W/TAPERED (6 EA / BOX)
681-51137$359.55Special collet design with tapers at both ends, providing maximum clamping surface Have a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb... -
240C PIN VISE W/TAPERED (1 EA)
681-51138$66.66Special collet design with tapers at both ends, providing maximum clamping surface Have a smaller body diameter than the chuck, which allows fast opening/closing and rapid rotation between the thumb... -
565D 4" 5/32" DRIVE PIN (12 EA / BOX)
681-52581$152.18Specially selected tool steel is hardened and tempered to the proper hardness Knurled finger grips for ease of handling A special tempering process makes the head less likely to fracture from a hard,... -
91 Series Tap Wrenches, 91A, 6 in Length, 1/16 - 1/4 in Tap Size (1 EA)
681-50419$104.10Will firmly hold square or round shanks Plunger operated by knurled sleeve Spring inside sleeve causes plunger to back off when pressure is removed Round shanks can be gripped, but care must be used... -
91 Series Tap Wrenches, 91B, 9 in Length, 3/16 - 1/2 in Tap Size (1 EA)
681-50420$148.93Will firmly hold square or round shanks Plunger operated by knurled sleeve Spring inside sleeve causes plunger to back off when pressure is removed Round shanks can be gripped, but care must be used...
