Double graduations from 0-180° in opposite directions permitting the direct reading of angles and supplementary anglesThe back of the tool is flat for ease of useThe blade can be locked firmly at any angle by the lock nutSatin chrome finish for ease of...

Each gage has leaves for measuring both concave and convex radii, with each leaf stamped with the radius sizeAny one of the leaves can be securely locked in position by a locking deviceFor laying out and checking radii of tools, dies, and patterns as...

Leaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking DeviceRugged, substantial steel case protects leavesLeaves easily removed or replacedFor adjusting tappets, spark plugs,...

Straight leavesLeaves made of finest tempered-steel, carefully finished to correct thickness, individually tested and marked with thicknessLocking device on most gagesLeaves easily removed or replacedRugged, substantial steel case protects leaves

Steel case protects leavesThickness marked on leafLocking device securely locks 1 or more leaves in positionLeaves easily removed or replacedFor adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting...

Satin finish stainless steelRust and stain resistantPrecision finished radii with smooth, accurate edgesEach blade has 5 different gauging surfaces for checking both convex and concave radiiEach gage is clearly marked with its radius

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Insulating PVC handle which is octagon shaped, preventing them from rolling when laid down Hole extends through the full length of the handles so that wires of...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Insulating PVC handle which is octagon shaped, preventing them from rolling when laid down Hole extends through the full length of the handles so that wires of...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Handles and binding nuts are nickel-plated Hole extends through the full length of the handles so that wires of any length and any diameter up to the full size...

Reversible collets with two size capacities at each end Both ends of each chuck are beveled, providing "back support" Knurled handle and binding nut One chuck holds 0" to 0.031" and 0.093" to 0.125" diameter tools Other chuck holds 0.031" to 0.062" and 0...

Jaws on all are hardened and with a few turns of the binding nut, a firm grip may be obtained Handles and binding nuts are nickel-plated Hole extends through the full length of the handles so that wires of any length and any diameter up to the full size...

For holding work together in tapping and drilling and on various machine setups Ends of the jaws are rounded to permit clamping under shoulders or in recesses A retaining ring holds the loose jaw in alignment when the clamp is being opened or closed...